Financing and Lease programs are available

SPRAY SYSTEMS

REAR SPRAYS

KT50 through KT140 Rigid hitch and Drop Tankers with 2 and 4 spray heads each are, 4-way adjustable individual air cab controlled.
  Using a KLEIN 6"X 5", 1500 gpm pump both spray systems produce patterns over 95’ wide.

  K 3000 30,000 gallon tank with a KLEIN 6"X 5",  1500 gpm pump with four rear spray heads.  Spray patterns up to 95’ wide.

Shown to the right is a K800 8,000 gallon tank having a rear spray bar with 4 each, 4-way adjustable spray heads.

  Klein articulated truck tanks are available with 2, 3, or 4 rear mounted spray heads each being individually controlled by air from the cab. Standard number of spray heads on all articulated truck tanks are 2, each being 4-way adjustable.

Rear spray bar with 2 heads each being 4-way adjustable spray heads on a 4,000 gallon truck tank. Each spray head is individually cab controlled.  

SIDE SPRAYS

  Side Jet spray bar on top of a K800 truck tank. Side Jet streams are typically narrow 5’ to 10’ in width, with 35’ to 45’ outreach per side and 35’ in height.

  Rear view of a bulkhead spray bar mounted on a tanker with two 4-way adjustable flat fan spray heads.
A flat fan pattern typically has widths of 80’ with a reach out from the tanker of 35’.

  Rear view of a side jetting spray with a reach out from the tank of 35’ to 50’. Side sprays are normally mounted behind the cab on highway truck tanks and can reach over 100’ to each side with high pressure pumps..

FRONT SPRAYS

  Front bumper street flusher spray bar and spray heads shown mounted on articulated chassis. Flusher heads are designed to provide a narrow, directed band of water to move the debris on roads, also shown is a remote stand pipe turret monitor.

  Front bumper 4-way adjustable flat fan spray heads. Flat fan spray heads are primarily used for dust control. The spray pattern typically is 35’ out from the head and 75’ to 90’ wide with 2 heads.

Front spray bar with 360 degree swivel flusher heads.

MID-SHIP (FLUSHER) SPRAY BARS

Mid-ship street flushers are used for cleaning streets with a heavy saturation of water under pressure and velocity.  Mid-ships are located on the side of the vehicles usually between the front and ahead of the rear tires.

  Side mid ship sprays with 360 degree swivel flusher heads, chassis can be equipped with heads left and right. 

GRAVITY SPRAY BARS

Full 8’ gravity spray bar with swing a-way 2’ extension ends. The above gravity spray bar is under pump pressure using penetrating nozzles to saturate under the soil surface.

    Full Width 4" slotted gravity feed spray bar, the slotting of the spray bar is to provide heavy saturation for a given area, Slot widths may vary depending on the flow requirements.

TREE WATERING ARMS

   KSF 250 Street Flusher shown with a front mounted tree watering bar. The Klein tree watering bar extensions are brake-a-way PVC. Tree watering bars are air, vacuum or water pressure controlled, and can be mounted on the right, left or both sides of the chassis.  

  Rear view of the same KEF 250 showing a brake-a-way PVC 3" gravity spray bar.  All Klein gravity spray bars have end clean outs.

This  web site was built by and is maintained by: Scott1  productions

^{Klein, KleinTanks, Klein pumps and Klein Parts are registered trademarks of Klein Products of Kansas Inc.}  

^{All rights are reserved}